Linux iSCSI Target (tgt) - Alpine Linux (2024)

The Linux target framework (tgt) is a user space SCSI target framework that supports the iSCSI and iSER transport protocols and that supports multiple methods for accessing block storage. tgt consists of user-space daemon and tools. Being a user space server, it does not require a kernel module to run. In Alpine Linux, the package is called scsi-tgt

Installation

In Alpine, scsi-tgt is split over several packages:

• scsi-tgt - the tgtd daemon.
• scsi-tgt-scripts - tgt-admin helper utility. Makes it easier to configure targets via config files.
• scsi-tgt-doc - documentation, man pages and example configurations.
• scsi-tgt-openrc - init scripts for runnit tgt as a service.

Only scsi-tgt is required to run the tgt target daemon. A running daemon can be configured with tgtadm command line tool. However, if you want to use configuration files you need the tgt-admin helper tool, which reads the config and emits appropriate tgtadm commands. The tgt-admin tool is written in perl, and so depends on perl being installed, which is why we have it as a separate package.

This guide assumes that you want to configure iSCSI targets via a configuration file, and have it automatically start during boot.

To install scsi-tgt and the utilities to configure tgt:

# apk add scsi-tgt scsi-tgt-scripts

Note: Note that without setting up the configuration file /etc/tgt/targets.conf first, the tgtd daemon will run with an empty configuration

Once you have editited the configuration file, you can activate the service with

# rc-update add tgt-admin# service tgt-admin start

Sample configuration

Here is an example configuration for exporting a local image file as a iSCSI target (virtual SCSI disk):

tgt-admin

tgt-admin is a convenience script to configure the running tgtd daemon. It is not needed if you want to manually configure tgtd using the tgtadm tool.

Documentation can be found in the scsi-tgt-doc package (man tgt-admin), but also on upstream's GitHub page

Common tgt-admin commands are:

• tgt-admin --execute

Load new targets from /etc/tgt/targets.conf. Existing targets won't be updated.

• tgt-admin --update <value>

Update selected targets. Targets in-use by initiators won't be updated.

• tgt-admin --show

Query tgtd for running configuration.

• tgt-admin --pretend

Only print what would be done and not make any changes.

tgt-admin examples

To see the status of the running configuration, use the tgt-admin -s command:

# tgt-admin -sTarget 1: iqn.2023-07.net.tnonline.wiki:server.target1 System information: Driver: iscsi State: ready I_T nexus information: LUN information: LUN: 0 Type: controller SCSI ID: IET 00010000 SCSI SN: beaf10 Size: 0 MB, Block size: 1 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: null Backing store path: None Backing store flags: LUN: 1 Type: disk SCSI ID: IET 00010001 SCSI SN: 1001 Size: 107374 MB, Block size: 4096 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: Yes Backing store type: rdwr Backing store path: /media/target/diskimage_1.img Backing store flags: Account information: user1 ACL information: 192.168.0.10

If you want to see that native commands are needed you can use the --verbose option.

Here you can see the the actual commands used when issuing tgt-admin --update ALL --verbose:

Removing target: iqn.2023-07.net.tnonline.wiki:server.target1

tgtadm -C 0 --mode target --op delete --tid=1

Adding target: iqn.2023-07.net.tnonline.wiki:server.target1

tgtadm -C 0 --lld iscsi --op new --mode target --tid 1 -T iqn.2023-07.net.tnonline.wiki:server.target1tgtadm -C 0 --lld iscsi --mode target --op update --tid 1 --name DataDigest --value Nonetgtadm -C 0 --lld iscsi --mode target --op update --tid 1 --name ErrorRecoveryLevel --value 2tgtadm -C 0 --lld iscsi --mode target --op update --tid 1 --name HeaderDigest --value Nonetgtadm -C 0 --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b "/media/target/diskimage_1.img" --blocksize 4096tgtadm -C 0 --lld iscsi --op update --mode logicalunit --tid 1 --lun 1 --params product_id="MediaFiles"tgtadm -C 0 --lld iscsi --op update --mode logicalunit --tid 1 --lun 1 --params "thin_provisioning=1 rotation_rate=0 sense_format=1"tgtadm -C 0 --lld iscsi --op update --mode logicalunit --tid 1 --lun 1 --params scsi_sn="1001"

Write cache is enabled (default) for lun 1.

tgtadm -C 0 --lld iscsi --op update --mode logicalunit --tid 1 --lun 1 --params vendor_id="Forza"tgtadm -C 0 --lld iscsi --mode account --op bind --tid 1 --user=user1tgtadm -C 0 --lld iscsi --op bind --mode target --tid 1 -I 192.168.0.10

Retrieved from ""